Distributed Virtual Routing – SNAT

June 26, 2015

Assaf Muller

Where Am I?
Overview and East/West Traffic
* SNAT
Floating IPs

SNAT vs Floating IPs

A quick reminder about two NAT types used in Neutron.

  1. SNAT refers to source NAT, or, changing the source address of packets as they leave the external device of a router. This is used for traffic originating from VMs that have no floating IP attached. A router is allocated a single IP address from the external network which is shared across all VMs connected to all subnets the router is connected to. Sessions are differentiated according to the full tuple of (source IP, destination IP, source port, destination port). This is typically known as ‘PAT’, or port address translation in the networking world.
  2. Floating IPs, sometimes called DNAT (Destination NAT) in Neutronland, implement a much simpler form of NAT, a 1:1 private to public address translation. You can assign a VM a floating IP and…

View original post 1,016 more words

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: